Apr 12, 2022 Hagyjon üzenetet

Elektroforetikus profilpaszta védőfólia vízjelezési jelenségének elemzése

Az elektroforetikus alumínium az alumínium-oxid, mint anód, amelyet vízben{0}}oldható emulziós oldatba helyeznek egyenárammal, és mesterségesen lerakják az alumínium-oxid filmbevonat film védőréteg felületére, hogy elektroforetikus alumíniumot képezzenek.

A kiváló minőségű{0}}elektroforetikus alumínium főbb jellemzői:

1. Erős festékfilm keménységű.

2, nagy tapadású fóliával, nem könnyű leesni az öregedésről.

3. Erősebb időjárásállósággal és lúgállósággal rendelkezik, mint az alumínium-oxid.

4, a felület színe gazdag, gyönyörű, tükörszerű -fényes hatással.

Az elektroforetikus profilok alkalmasabbak kültéri használatra, a nemzeti szabvány 70 éves időjárásállósági alap másodlagos megöli egyéb felületkezeléseket.

Electrophoretic profile packaging materials are mostly used for strong adhesion film as a protective film, aluminum profiles in a protective film for a period of time, the film is torn to find that aluminum profiles have film printing or called watermark. There are two kinds of watermarks: one is volatile watermarks, which will disappear after a period of time after the film is torn. The two are non-volatile watermarks, which do not disappear after tearing the film for a year or two. The situation of volatile watermarking almost all aluminum plants have appeared. There are two kinds of watermarks: one is volatile watermarks, which will disappear after a period of time after the film is torn. The two are non-volatile watermarks, which do not disappear after tearing the film for a year or two. The situation of volatile watermarks has appeared in almost all aluminum factories, and there are two kinds of watermarks: one is volatile watermarks, which will disappear after a period of time after the film is torn. The two are non-volatile watermarks, which do not disappear after tearing the film for a year or two. The situation of volatile watermarking almost all aluminum plants have appeared.

Film watermarking is a common phenomenon, film such as air separation, and moisture formation, which has been recognized in the industry. Many factories have also done a large number of relevant experiments. There are several considerations:

1 szilárdulási folyamat kísérlet

180 degrees 30 minutes basically appear watermark boundary, 200 degrees 10 minutes effect is also better than 180 degrees 30 minutes effect. So the temperature and time is quite key, especially in the case of heat will fade the coloring way, must be integrated to weigh the curing process and color.

2 védőfólia viszkozitás és vízpermet kísérlet

There were watermarks 24 hours after spraying film for both high viscosity and medium viscosity, while there were almost no watermarks 24 hours after spraying film for low viscosity. It shows that the viscosity of the membrane has a great relationship. But there is a phenomenon, if sprayed with pure solvents such as alcohol, there is no watermark on any viscosity. The author cannot find a reasonable explanation for this phenomenon. I'll leave that to the right person.

3. Problémák az elektroforézis tartályos megoldással

A fentiek csak az eredmények elemzéséből származnak, de a probléma más gyárban történő kezelésének módja az alapvető probléma irányának felismerésére készteti a szerzőt.

It is also a watermarking problem, but the delivery is urgent, and the change of low viscosity protective film is not guaranteed to be a problem, but also to observe the time. The workshop director decided to rearrange the electrophoresis tank. (Pull out to empty slot, can be added later). The process was not changed and the problem disappeared. I can't remember any new grooves having similar problems.

A következő csak egy következtetés. A szerző tulajdonában lévő berendezés jelenleg nem támogatja az ellenőrzést.

In electrophoresis, only the solvent can not be tested. It can be inferred from the above phenomenon that the solvent is reduced, and the principle of recovery equipment is to filter water and solvent from the main tank to water washing, and the solid components of water washing return to the main tank, and achieve the purpose of recovery. The volatile nature of the solvent and the lack of laboratory equipment, resulting in the failure to quantify the proportion of solvent imbalance.

Az oldószer kiegyensúlyozatlansága károsíthatja a festékréteg tömörségét és egyenletességét, és víz kerülhet a festékrétegbe, ami vízjel kialakulását eredményezheti.

Összefoglalva a fenti három pontot, remélem, hasonló esetekben lehet összehasonlítani, hogy megtalálják a problémát.


A szálláslekérdezés elküldése

whatsapp

Telefon

E-mailben

Vizsgálat